Rockwell-automation 842E EtherNet/IP Absolute Encoder User Manual Manual de usuario descargar pdf (Pagina 32)

24 Rockwell Automation Publication 842E-UM001A-EN-P May 2012

Chapter 5 Configuring the encoder for your EtherNet/IP network

Assigning the IP Address using BootP/DHCP:

Verify that the encoder’s MAC ID is in the relationship list in the BootP Utility

or DHCP server before attempting to assign the encoder an IP address using this

procedure.

1. Set the three network address switches to 999 and cycle power.

2. Set the three network address switches to 000 and cycle power.

3. The encoder will power up and request an IP address from a BootP/

DHCP server.

4. If the encoder’s MAC ID is in the relationship list, the BootP/DHCP

server will assign the associated IP address to the corresponding MAC ID.

Function of network address switch settings

Setting of

network address switches Function

001-254 Sets last octet of the IP address to the value indicated (xxx in 192.168.1.xxx)

888 Restores all factory default settings in the encoder and clearing its IP address

999 Clears the encoder’s IP address

ATTENTION

Disable DHCP after the new network address is set (see next step).

This prevents unexpected resetting of the network address, which could result

in unintended machine motion or loss of process control.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 79 80

Sin comentarios

Rockwell-automation 842E EtherNet/IP Absolute Encoder User Manual Manual de usuario Pagina 32