Rockwell-automation 8520-OM Offline Development System User Manual Manual de usuario Pagina 21
- Pagina / 100
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
2-- 7Installing ODS
Publication 8520-- UM051A--EN--P -- July 2000
Offline DevelopmentManual (ODS) SoftwareUser Manual
The record DEVICE=DF1DRV.SYS enables the DF1
communication driver to transfer files between ODS and the
servo controller.
When selecting a ny other CONFIG.SYS commands, be aware of
the memory r equirements.
2. Reboot the computer to read the data from this file.
If you are using a DOS-based system, you can directly start ODS.
You must modify the PATH command in the AUTOEXEC.BAT file
by adding this entry to t he path:
;C:\IMC
If you want ODS to start automatically when you turn on the
computer, add this entry to the last line of the AUTOEXEC.BAT file:
IMC
Refer to the computer’s DOS manual f or further instructions.
If for any reason you need to remove the ODS software from t he
computer’s hard disk, use the following procedure:
Important: This procedure assumes that the floppy-disk drive is
drive A and the hard -disk drive is drive C. If the drive
designations on your computer are different, substitute
the appropriate designations.
Important: Before you remove the ODS software from the hard
disk, back up any projects you need to save, then delete
all of the projects.
1. Insert ODS disk 1 in floppy-disk drive A.
2. If you are at the
C: prompt, t ype:
a:
and press [ENTER].
3. At the prompt, type:
a:remove
and press [ENTER].
The removal utility displays this message:
Modifying the
AUTOEXEC.BAT File
Removing the ODS
Software
- User Manual 1
- Information 2
- Important User 2
- Using this Manual 3
- Warnings, Cautions, and 4
- Important Information 4
- Audience 4
- Terms and Conventions 4
- • full screens 5
- • partial screens 5
- • pop-up windows 5
- • screen text 5
- Related Publications 6
- Summary of Changes 8
- Table of Contentsii 10
- Chapter 7 11
- Introducing ODS 12
- 1-- 3Introducing ODS 14
- Installing ODS 15
- • Start installation again 17
- Modifying the 20
- CONFIG.SYS File 20
- AUTOEXEC.BAT File 21
- Removing the ODS 21
- Software 21
- 2-- 8 Installing ODS 22
- [ENTER] 22
- 2-- 9Installing ODS 23
- What to Do Next 24
- Getting Started with ODS 25
- Using DOS 26
- Using Pulldown Menus 28
- Using Online Help 29
- ↑]orarrow 31
- Copy file entry 31
- Reading the Status Line 32
- Application 33
- Figure 3.3 34
- Application Organization 34
- Using Directories 35
- Entering File and Project 35
- Interpreting Error 36
- Messages 36
- Using the [ESC] Key 36
- Exiting from ODS 36
- Configuring ODS 37
- Keyboard Setup 38
- Configuring the Serial 39
- Communication Setup 39
- Configuring Print Device 40
- (Windows NT only) 40
- Turning the Beeper 40
- Turning the Verify Feature 41
- Executing DOS 42
- Commands from within 42
- Using ODS for Project 43
- Management 43
- [ENTER] to continue 44
- [ESC] to cancel 44
- Opening an Existing 48
- Displaying Project 49
- Changing Project 50
- Copying a Project 53
- Copying files 55
- Renaming a Project 56
- Deleting a Project 57
- Backing Up a Project to 58
- Floppy Disk 58
- Restoring a Backed-up 60
- Restore completed 61
- Selecting an Application 62
- Selecting a Utility 63
- Using ODS File Management 64
- Choosing the File Type 65
- Within a PAL Application 65
- Copying a File from a 65
- Current Project 65
- Renaming a File from a 66
- Deleting a File from a 67
- Copying Files from 68
- Another Project 68
- ] to cancel 70
- Printing an ODS File 71
- Canceling a Printing 72
- Displaying an ODS File 73
- Recovering Backup Files 74
- Using ODS Communication 75
- Configuration 75
- Selecting the 76
- Communication Code 76
- Menu Structure 77
- Configuring a 1784-KL 77
- Configuring a 1784-KT 77
- Figure 7.3 78
- KT Address 79
- Considerations 79
- Programming from DH+ to 80
- 1784-KTK1 81
- Configuring the 81
- KTK1 Address 82
- 6122 Considerations 82
- IBM PC XT Considerations 82
- Configuring a Serial Driver 83
- Using INTERCHANGE 84
- Configuring DH+ Under 85
- Windows NTt In ODS 85
- Configuring RSLinx for 86
- Ethernet 86
- Downloading AMP Files 86
- PN 176947 100
Relacionado con productos y manuales para Equipo Rockwell-automation 8520-OM Offline Development System User Manual
Equipo Rockwell-automation 1798-OB8E FlexArmor 24V dc Sourcing Output Modules Manual de usuario
(12 paginas)
(12 paginas)
Equipo Rockwell-automation CENTERLINE MCC Hinge Assembly Instruction for 1/2 Manual de usuario
(2 paginas)
(2 paginas)
Equipo Rockwell-automation 7000 PowerFlex Medium Voltage Air-Cooled (B Frame) Manual de usuario
(96 paginas)
(96 paginas)
Equipo Rockwell-automation 2711P-RAK12e Adapter Kit for PanelView 1200/1200E/ Manual de usuario
(8 paginas)
(8 paginas)
Equipo Rockwell-automation 6159 Industrial 17 inch CRT Monitors, Series B Manual de usuario
(36 paginas)
(36 paginas)
Equipo Rockwell-automation 2705 RediSTATION Operator Interface User Manual Manual de usuario
(64 paginas)
(64 paginas)
Equipo Rockwell-automation 2080-LC20-20QWB_20AWB_20QBB_20QWBR_20AWBR_20QBBR M Manual de usuario
(24 paginas)
(24 paginas)
Equipo Rockwell-automation 2727-M7P20D1P1, -M7P20D1Q2, -M7P20D1Q3 MobileView Manual de usuario
(148 paginas)
(148 paginas)
Equipo Rockwell-automation 2711 PanelView 550/900 Profibus Communications Use Manual de usuario
(44 paginas)
(44 paginas)
Equipo Rockwell-automation 2364F DC Link Fuse Upgrade Kit for RGU Parallel w/ Manual de usuario
(12 paginas)
(12 paginas)
Equipo Rockwell-automation 6189V-CFSSD16GB Memory Module (DRAM) for 6181X Ind Manual de usuario
(2 paginas)
(2 paginas)
Equipo Rockwell-automation 2711-NMCC, -NMCD, -NMCE Memory Card Retainer for P Manual de usuario
(8 paginas)
(8 paginas)
Equipo Rockwell-automation 7000L PowerFlex Medium Voltage AC Drive (C-Frame) Manual de usuario
(432 paginas)
(432 paginas)
Samsung AOK-200CAN manuali
Manuali dei proprietari e guide per l'utente per no Samsung AOK-200CAN.
We fornisce 1 manuali pdf Samsung AOK-200CAN per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Comentarios a estos manuales