Rockwell-automation 8520-OM Offline Development System User Manual Manual de usuario descargar pdf (Pagina 50)

5-- 8 Using ODS for Project Management

Publication 8520-- UM051A--EN--P -- October 2000

Offline DevelopmentManual (ODS) SoftwareUser Manual

The Change Info option lets you change the following information

for the active project:

•communication selection •date created

•developer’s name •comments (2 lines)

If you want to change the control type or the firmware revision, you

must create a new project. Use F2-Copy Project to copy the original

project.

1. Press [

F2] and pull down the F2-Project menu.

2. Select the

Change Info option.

ODS displays the c ommunication m enu:

3. To change your selection:

To: Select:

the serial port for standard RS232 communication (C)

the port for the Data Highway Plus network

(D)

the port for Ethernet/OCI communication

(E)

communicate with 9/PC, using your PC (P)

The configuration menu flow for the Data Highway Plus and Ethernet are in

Chapter 7.

Important: You can configure ODS to the DH+ network if the Data

Highway selection is not ghosted.

Changing Project

Information

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 99 100

Sin comentarios

Rockwell-automation 8520-OM Offline Development System User Manual Manual de usuario Pagina 50