Rockwell-automation AADvance Controller System Build Manual de usuario descargar pdf (Pagina 52)

3-8

Document: 553632

(ICSTT-RM448_EN_P) Issue: 08:

System Build Manual (AADvance Controller)

For each power supply connection, do the following:

 Connect the negative line from the power supply, typically labelled '0V', to the left-

hand terminal.

 Connect the positive line from the power supply, typically labelled '+24V', to the

right-hand terminal.

 Apply a minimum tightening torque of 0.5 Nm (0.37 ft lb) to the terminal screws.

Note: Make sure that PWR-1 and PWR-2 are supplied from independent 24V dc

sources.

Refer to the illustration for an example.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 129 130

Sin comentarios

Rockwell-automation AADvance Controller System Build Manual de usuario Pagina 52