Rockwell-automation FactoryTalk Historian SE 3.0 Live Data Interface U Manual de usuario descargar pdf (Pagina 19)

3 ● Configuring FactoryTalk Historian Live Data Interface

●

If you configure an interface in the ICU, the batch file of the interface

(FTLDInt.bat) will be maintained by the ICU, and all configuration

changes will be kept in that file.

To configure an FTLD Interface with the ICU:

1. Go to Start > All Programs > Rockwell Software > FactoryTalk

Historian SE > Interface Configuration Utility. The Interface

Configuration Utility dialog box appears.

2. From the menu bar, select Interface > New Windows Interface

Instance from BAT File. The Open Interface Configuration File

dialog box appears.

3. Navigate to C:\Program Files\Rockwell Software\FactoryTalk

Historian\Server\PIPC\Interfaces\LDInterface.

4. Select the FTLDInt_FTLD.bat.bak file and click Open.

5. Click OK in the Interface Configuration Utility message box to

acknowledge the information on duplicated point sources and ID

combinations.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 61 62

Sin comentarios

Rockwell-automation FactoryTalk Historian SE 3.0 Live Data Interface U Manual de usuario Pagina 19