Rockwell-automation Logix5000 Control Systems: Connect POINT I/O Modul Manual de usuario descargar pdf (Pagina 16)

16 Rockwell Automation Publication IASIMP-QS026A-EN-P - July 2012

Chapter 1 Prepare the Distributed POINT I/O Hardware

4. Connect the 1799-DNC5MMS 5-

pin linear to micro male adapter to

the female end of the 1485K-P1F5-

R5 KwikLink right-angle micro

male to micro female connector

cable.

5. Connect the female end of the

DeviceNet cable to the adapter.

6. Connect the other end of the

cordset to the DeviceNet network.

7. Remove the safety end cap.

This exposes the backplane and

power interconnections.

ATTENTION: Do not discard the end

cap. Use this end cap to cover the

exposed interconnections on the last

mounting base on the DIN rail. Failure

to do so could result in equipment

damage or injury from electric shock.

Adapter

Status

System

Power

DeviceNet

Status

PointBus

Status

Field

Power

1734-ADN

Safety End Cap

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 61 62

Sin comentarios

Rockwell-automation Logix5000 Control Systems: Connect POINT I/O Modul Manual de usuario Pagina 16