Rockwell-automation Logix5000 Control Systems: Connect POINT I/O Modul Manual de usuario descargar pdf (Pagina 47)

Rockwell Automation Publication IASIMP-QS026A-EN-P - July 2012 47

Chapter

Use the POINT I/O Adapter and Output Module in

an RSLogix 5000 Project

In this chapter, you complete the following tasks:

• Create DeviceNet tags with the DeviceNet Tag Generator tool

• Add ladder logic to the RSLogix 5000 project

• Download the updated project to your controller

• Test the ladder logic on your 1734-OB4E output module

Before You Begin

Before you begin, you must complete these tasks:

• These tasks described in Before Using This Publication on page 5:

– Prepare the Logix5000 control system hardware

– Prepare the computer

– Configure the network

– Create an RSLogix 5000 project

IMPORTANT

Multiple Logix5000 control systems can use POINT I/O modules over a DeviceNet network. For example purposes,

this quick start describes the use of POINT I/O modules over a DeviceNet network in a CompactLogix 5370 L3

control system that includes a 1769-SDN scanner module in a local expansion module slot.

This section uses an RSLogix 5000 project that matches the control system described previously and is named

POINT_IO_on_DeviceNet_quick_start.acd. The 1769-SDN scanner module has been configured so the

RSNetWorx tab links the RSLogix 5000 project to the DeviceNet file created in Create a DeviceNet Configuration File

on page 30.

If you use a different Logix5000 controller and DeviceNet scanner module, you can complete the tasks in this

chapter but must account for any software differences.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 61 62

Sin comentarios

Rockwell-automation Logix5000 Control Systems: Connect POINT I/O Modul Manual de usuario Pagina 47