Rockwell-automation Logix5000 Control Systems: Connect POINT I/O Modul Manual de usuario descargar pdf (Pagina 23)

Rockwell Automation Publication IASIMP-QS027A-EN-P - February 2012 23

Add the POINT I/O Ethernet Adapter and Digital Output Module to an RSLogix 5000 Project Chapter 2

Configure the POINT I/O Adapter and Output Module

1. Open your RSLogix 5000 project and verify that it is Offline with the controller.

2. Right-click Ethernet in the I/O

Configuration folder and choose

New Module.

3. Select the 1734-AENT Ethernet

adapter and click Create.

4. Type the name for the adapter.

5. Type the adapter’s IP address.

6. Click Change.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Sin comentarios

Rockwell-automation Logix5000 Control Systems: Connect POINT I/O Modul Manual de usuario Pagina 23