Rockwell-automation Logix5000 Controllers Produced and Consumed Tags P Manual de usuario descargar pdf (Pagina 16)

Chapter 1 Produce and Consume a Tag

If the producing controller

Then the data type should be

PLC-5C controller User-defined data type with these members.

Data type Description

DINT Status

INT[x], where x is the output size of the data from the PLC-5C controller.

(If you are consuming only one INT, omit x.)

Data produced by a PLC-5C controller

8. Click Connection to define the consumed tag.

9. Do the following on the Consumed Tag Connection dialog box:

• In the Producer list, choose the controller that produces the data.

If the drop down is empty, you must first add a remote controller to the

Controller Organizer I/O Configuration folder. This is the controller that

is producing the data. If you have only one controller configured, it cannot

be both the consumer and the producer. The producing controller cannot

consume its own data.

• In the Remote Data box, type the name or instance number of the

remote, produced data.

If the producing controller is Then type or choose

Logix5000 controller Tag name of the produced tag

PLC-5C controller Message number from the ControlNet configuration

of the PLC-5C controller

• In the RPI field, type or select the requested packet interval (RPI) for

the connection.

Important:

Consuming controllers have additional setup to allow its consuming tags to use an RPI provided

by a producing controller. See Set RPI limits, default for producer tag on page 19 for details.

16 Rockwell Automation Publication 1756-PM011F-EN-P - October 2014

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Sin comentarios

Rockwell-automation Logix5000 Controllers Produced and Consumed Tags P Manual de usuario Pagina 16