Rockwell-automation MMCL Using the Mining, Mineral, and Cement Library Manual de usuario Pagina 26

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 62
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 25
Publication RA-UM002B-EN-P - November 2010
26 Control Group
* If the group has not already started a motor, status 1 and 2, will directly
pass over to status 0.
Each status change, further causes an output ResetSFC, that can be used to
initialize (reset) the Sequential Function Chart (SFC). The SFC then selects the
actual sequence (e.g. stop sequence).
Vista de pagina 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 61 62

Comentarios a estos manuales

Sin comentarios