Rockwell-automation T8311 Trusted Expander Interface Manual de usuario descargar pdf (Pagina 17)

Trusted

Module T8311

Issue 12 Mar 07 PD-T8311 17

3.4. Module Information

The following information is recorded by the TMR Expander Interface Module and made available to

the TMR Processor.

3.5. System Initialisation File

This module requires a simple entry in the system INI configuration. Within this entry, the System

Configurator allows the connection of expansion chassis to each port on the expander interface. There

is no further configuration required. For details of editing the system INI configuration, please refer to

PD-8082.

In the system INI configuration, the module should be defined in both the primary position and the

secondary (hot swap spare) position. This is required to enable the module to be hot swapped. The

chassis allocation only needs to be set up in one of the positions; it will be automatically copied to the

other position.

• Expander Bus link quality, including receive error counts for each communications link and

link status.

• Received message error, on a per link/FCR basis, incl

uding frame error, checksum error and

discrepancy.

• HIFT Clock, master and slave clock status, and master/slave switching.

• FCR watchdog status.

• Current active/standby status.

• IMB status information.

• Module type code and serial number.

• Module removed flap status.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Sin comentarios

Rockwell-automation T8311 Trusted Expander Interface Manual de usuario Pagina 17