Rockwell Automation 1203-SSS Manual de usuario descargar pdf (Pagina 36)

3-4 Configuring the Converter

PowerFlex 1203-USB Converter User Manual

Publication DRIVES-UM001D-EN-P

9. Enter the following settings.

10. Click OK.

The Configure Drivers dialog box appears.

11. Verify that the status of the newly created driver is ‘Running’.

12. Click Close.

13. From the Communications menu, choose RSWho to display the browse

window.

14. Expand the treeview in the left pane to display the ‘DPI’ or ‘DSI’ icon

to verify that the driver is communicating with the device.

Depending on the type of drive to which the 1203-USB converter is

connected, the converter will show up as either a DSI device (DSI icon)

or DPI device (DPI icon). The browse window should look similar to

this example window.

Configuration Field Setting

Comm Port Select the same COM port established during installation of the

1203-USB driver (noted in step 1 on page 3-2). For this example,

COM5 is used.

Device 1770-KF2/1785-KE/SCANport

Baud Rate 115200

Station Number 00 (default)

Parity None (default)

Error Checking BCC (default)

Stop Bits 1 (default)

Protocol Full Duplex (default)

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 111 112

Sin comentarios

Rockwell Automation 1203-SSS Manual de usuario Pagina 36