Rockwell-automation 1440-DYN02-01RJ XM Dynamic Measurement Module Manual de usuario

Installation InstructionsXM Dynamic Measurement ModuleCatalog Number 1440-DYN02-01RJTopic PageImportant User Information 2Environment and Enclosure 3N

10 XM Dynamic Measurement Module Publication ICM-IN002A-EN-P - March 2009Set the Node AddressThe module has a DIP switch for setting the network no

XM Dynamic Measurement Module 11Publication ICM-IN002A-EN-P - March 2009(1) Do not set the node address to 0. Node addresses start with 1 for the

12 XM Dynamic Measurement Module Publication ICM-IN002A-EN-P - March 2009Self-TestThe XM module performs a self-test when it powers up. The self-te

XM Dynamic Measurement Module 13Publication ICM-IN002A-EN-P - March 2009Status IndicatorsThe module has seven LED indicators on top of the module.

14 XM Dynamic Measurement Module Publication ICM-IN002A-EN-P - March 2009Network Status (NS) Off Module is not online.• Module is autobauding.• No

XM Dynamic Measurement Module 15Publication ICM-IN002A-EN-P - March 2009Specifications(1)Use this Conductor Category information for planning cond

16 XM Dynamic Measurement Module Publication ICM-IN002A-EN-P - March 2009Environmental SpecificationsAttribute ValueOperating TemperatureIEC 60068-

XM Dynamic Measurement Module 17Publication ICM-IN002A-EN-P - March 2009(1)Use this Conductor Category information for planning conductor routing.

18 XM Dynamic Measurement Module Publication ICM-IN002A-EN-P - March 2009(1)See the Product Certification link at http:// www.ab.com for Declaratio

XM Dynamic Measurement Module 19Publication ICM-IN002A-EN-P - March 2009Additional ResourcesThese documents contain additional information concern

2 XM Dynamic Measurement Module Publication ICM-IN002A-EN-P - March 2009Important User InformationSolid state equipment has operational characteris

Rockwell Automation SupportRockwell Automation provides technical information on the Web to assist you in using its products. At http://support.rockwe

XM Dynamic Measurement Module 3Publication ICM-IN002A-EN-P - March 2009Environment and EnclosureATTENTIONThis equipment is intended for use in a P

4 XM Dynamic Measurement Module Publication ICM-IN002A-EN-P - March 2009North American Hazardous Location ApprovalThe following information applies

XM Dynamic Measurement Module 5Publication ICM-IN002A-EN-P - March 2009European Hazardous Location ApprovalEuropean Zone 2 Certification (The foll

6 XM Dynamic Measurement Module Publication ICM-IN002A-EN-P - March 2009Prevent Electrostatic DischargeWARNINGSecure any external connections that

XM Dynamic Measurement Module 7Publication ICM-IN002A-EN-P - March 2009About the ModuleThe 1440-DYN02-01RJ module is a 2-channel general purpose m

8 XM Dynamic Measurement Module Publication ICM-IN002A-EN-P - March 2009Install the ModuleThe module mounts on a 1440-TBS-J terminal base unit. We

XM Dynamic Measurement Module 9Publication ICM-IN002A-EN-P - March 20091. Make certain the keyswitch (D) on the terminal base unit (E) is at posit