Rockwell-automation 1440-DYN02-01RJ XM Dynamic Measurement Module Manual de usuario descargar pdf (Pagina 15)

XM Dynamic Measurement Module 15

Publication

ICM-IN002A-EN-P - March 2009

Specifications

(1)

Use this Conductor Category information for planning conductor routing. Refer to Industrial

Automation Wiring and Grounding Guidelines, publication

1770-4.1.

Flashing Yellow Tachometer fault other than a transducer

fault (for example no pulse received).

Flashing Red Tachometer signal DC bias is not within

the DC Low and High Limits.

Setpoint Multiplier Off Alarm Limit Multiplier is not in effect.

Solid Yellow Alarm Limit Multiplier is in effect.

Relay Off Virtual relay is not activated.

Solid Red Virtual relay is activated.

XM Dynamic Measurement Module - 1440-DYN02-01RJ

Attribute Value

Enclosure Type Rating None (open-style)

Input Voltage (mounted in the 1440-TBS-J) 24V DC

Current Draw Max 250 mA

Output Voltage -24V DC, 60 mA Max

Isolation Voltage Not Rated (Class 2 power source required)

No isolation between I/O or backplane

Wire Size Determined by installed terminal base

Wiring Category

(1)

2 - on signal ports

1 - on power ports

2 - on communications ports

North American Temp Code T4A

IEC Temp Code T4

Indicator State Description

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Rockwell-automation 1440-DYN02-01RJ XM Dynamic Measurement Module Manual de usuario Pagina 15