Rockwell-automation 1440-DYN02-01RJ XM Dynamic Measurement Module Manual de usuario descargar pdf (Pagina 12)

12 XM Dynamic Measurement Module

Publication

ICM-IN002A-EN-P - March 2009

Self-Test

The XM module performs a self-test when it powers up. The self-test includes

an LED test and a device test. During the LED test, the indicators will turn

on independently and in sequence for approximately 0.25 seconds.

The device test occurs after the LED test. The Module Status (MS) indicator

is used to indicate the status of the device self-test.

MS Indicator State Description

Flashing Red and Green Device self-test is in progress.

Solid Green or Flashing Green Device self-test completed successfully, and

the firmware is valid and running.

Flashing Red • Device self-test completed, the hardware

is OK, but the firmware is invalid.

• The firmware download is in progress.

Solid Red Unrecoverable fault, hardware failure, or Boot

Loader program may be corrupted.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Rockwell-automation 1440-DYN02-01RJ XM Dynamic Measurement Module Manual de usuario Pagina 12