Rockwell-automation 1734-ADN, ADNX Point I/O DeviceNet Adapter Install Manual de usuario descargar pdf (Pagina 17)

POINT I/O DeviceNet Adapter 17

Publication

1734-IN026A-EN-P - April 2005

Adapter

Status

Off No power is applied to device. Power the adapter.

Green Device is operating normally. None

Flashing

Green

Device needs to be

commissioned because

configuration is missing,

incomplete, or incorrect

Check configuration and

recommission the adapter.

Flashing

Red

Recoverable fault is present. Make sure the adapter does

not need a FLASH update.

Red Unrecoverable fault may require

device replacement.

Replace the adapter.

Flashing

Red/Green

Device is in self-test. Wait for self-test to finish.

Network

Status

Off Device is not online.

- Device is autobauding .

- Device has not completed

dup_MAC_id test.

- Device is not powered.

Check adapter status

indicator to determine if you

need more time to complete

the dup_MAC_id test or if

you need to power the

adapter.

Flashing

Green

Device is online but has no

connections in the established

state.

None

Green Device is online and has

connections in the established

state.

None

Flashing

Red

One or more I/O connections are

in timed-out states

Determine the cause of the

time-out. You may need to

increase the expected

packet rate.

Red Critical link failure -

communication device failed.

Device detected error that

prevents it from communicating

on the network.

Make sure the device is

using the correct MAC ID

and baudrate.

Indicator Indication Probable Cause Take This Action

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Comentarios a estos manuales

Sin comentarios

Rockwell-automation 1734-ADN, ADNX Point I/O DeviceNet Adapter Install Manual de usuario Pagina 17

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation 1734-ADN, ADNX Point I/O DeviceNet Adapter Install