Rockwell-automation 1746-NO8V SLC 500 8-Point Analog Output Module/ Us Manual de usuario descargar pdf (Pagina 10)

Publication 1746-UM026A-EN-P - September 2003

2-2 Installation and Wiring

Low Voltage Directive

This product is tested to meet Council Directive 73/23/EEC Low

Voltage, by applying the safety requirements of EN 61131-2

Programmable Controllers, Part 2 – Equipment Requirements and

Tests.

For specific information required by EN61131-2, see the appropriate

sections in this publication, as well as the following Allen-Bradley

publications:

• Industrial Automation, Wiring and Grounding Guidelines for

Noise Immunity, publication 1770-4.1

• Automation Systems Catalog, publication B113

Hazardous Location

Considerations

This equipment is suitable for use in Class I, Division 2, Groups A, B,

C, D or non-hazardous locations only. The following ATTENTION

statement applies to use in hazardous locations.

ATTENTION

EXPLOSION HAZARD

• Substitution of components may impair suitability

for Class I, Division 2.

• Do not replace components or disconnect

equipment unless power has been switched off.

• Do not connect or disconnect components unless

power has been switched off.

• This product must be installed in an enclosure.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 73 74

Sin comentarios

Rockwell-automation 1746-NO8V SLC 500 8-Point Analog Output Module/ Us Manual de usuario Pagina 10