Rockwell-automation 1756-CN2R ControlLogix ControlNet Interface Module Manual de usuario descargar pdf (Pagina 11)

ControlLogix ControlNet Bridge Module 11

Publication

1756-IN602A-EN-P - November 2005

Install the Module

1. Align the circuit board with top and bottom guides in the

chassis.

2. Slide the module into the chassis.

Make sure the module backplane connector properly connects

to the chassis backplane.

The module is properly installed when it is flush with the power

supply or other installed modules.

ATTENTIO

Do not force the module into the backplane connector. If

you cannot seat the module with firm pressure, check the

alignment. Forcing the module into the chassis can

damage the backplane connector or the module.

Circuit

Board

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Sin comentarios

Rockwell-automation 1756-CN2R ControlLogix ControlNet Interface Module Manual de usuario Pagina 11