Rockwell-automation 1756-CN2R ControlLogix ControlNet Interface Module Manual de usuario descargar pdf (Pagina 21)

ControlLogix ControlNet Bridge Module 21

Publication

1756-IN602A-EN-P - November 2005

Red BPIC

ERR

Hardware fault

within the module.

Replace the module.

CNIC

ERR

DUPL

NODE

The module’s network address is

the same as another module’s on

the link.

1. (Optional, see page 9.)

Turn off chassis power

supply.

2. Remove the module from

the chassis.

3. Set the network address

switches to a unique

address (01 to 99).

4. Install the module in the

chassis.

5. If off, turn chassis power

supply on.

RACK

ERR

Cannot read backplane EEPROM,

or rack/slot address incorrect

Replace the chassis.

Flashing

red

BOOT Module has invalid firmware. Update module firmware with

ControlFlash Update Utility.

ROM

UPDT

Flash update is in progress. None required.

SNGL

KPR!

Module detected that it has

been connected to a ControlNet

1.0 or 1.25 (single-keeper)

network.

Update the firmware of module at

node address 01 and reschedule

the network.

Diagnostics

LED Display

Cause Recommended Action

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Comentarios a estos manuales

Sin comentarios

Rockwell-automation 1756-CN2R ControlLogix ControlNet Interface Module Manual de usuario Pagina 21

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation 1756-CN2R ControlLogix ControlNet Interface Module