
Rockwell Automation Publication 1769-UM012B-EN-P - January 2014 23
Configure the 1769-ASCII Module Chapter 2
The Module Properties Dialog box appears.
6. Review and make sure you have the correct module.
7. Type a name.
8. Type a description, if needed.
9. Assign a slot number to the module.
10. Review the Module Definition area and make sure the information is
correct.
11. Click Change on the General tab to modify the module definition
parameters.
The Module Definition box appears.
The examples used later in this chapter, has electronic keying disabled but
compatible keying is suggested. For mor information, see Electronic Keying
on
page 105.
Comentarios a estos manuales