Rockwell-automation 1771-DMC_DMC1_DMC4_DXPS Control Coprocessor User M Manual de usuario descargar pdf (Pagina 93)

Chapter 6



6-12

Figure 6.10

List Ethernet Hardware Address

To download the Ethernet configuration files to the control coprocessor

and initialize the Ethernet port:

1. Select

I) Internet Utilities on the PCBridge main menu.

2. Select

S) Setup OS-9 Internet on the next menu.

This causes the configuration files to be sent to the control

coprocessor. These files will be stored in the SYS directory on the

control-coprocessor RAM disk.

3. At the OS-9 $ prompt, type

startinet and press [Return]

—this invokes the STARTINET procedure file to start up the

Internet software.

You can now use TELNET, FTP, and the socket library for your custom

Internet applications. See the OS-9 Internet Software Reference Manual,

1771-6.4.11, for more information. Also, refer to the README file in the

INET directory for more information.

The file transfer utility (FTP) is used to transfer files to and from remote

systems. There are many FTP commands to facilitate file manipulation

between systems. See the OS-9 Internet Software Reference Manual,

1771-6.4.11, for more information on the FTP utility.

Configuring the

Ethernet Port

Using the OSĆ9/Internet

FTP Utility

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 311 312

Sin comentarios

Rockwell-automation 1771-DMC_DMC1_DMC4_DXPS Control Coprocessor User M Manual de usuario Pagina 93