Rockwell-automation 1771-DMC_DMC1_DMC4_DXPS Control Coprocessor User M Manual de usuario descargar pdf (Pagina 98)

Chapter 6



6-17

This utility provides user-interface communication to other nodes on the

Internet system. The TELNET utility provides the ability to log on to

remote systems using the control coprocessor and your screen as a terminal

connected to the remote host. See the OS-9 Internet Software Reference

Manual, publication 1771-6.4.11, for more information on the TELNET

utility and commands available.

The following examples show how you might conduct a TELNET session

Important: The following TELNET session is an example only.

It represents how one network is set up and how we accomplished a

TELNET session.

1. At the

$ prompt, type telnet and press [Return]. See

Figure 6.17. This starts the interface to the

telnet protocol.

2. At the

telnet prompt, type help and press [Return] to get a list

of all the available TELNET commands. See Figure 6.17.

Figure 6.17

Starting TELNET and TELNET Help

3. At the telnet prompt, type open and press [Return] to start a

terminal session. See Figure 6.18.

Using the OSĆ9/Internet

TELNET Utility

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 311 312

Sin comentarios

Rockwell-automation 1771-DMC_DMC1_DMC4_DXPS Control Coprocessor User M Manual de usuario Pagina 98