Rockwell-automation 1771-IL INSTL.INSTR.ISOL ANALOG INPUT Manual de usuario Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 16
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
Isolated Analog Input Module 15
Publication 1771Ć5.51 - October 1996
The following are major differences between series levels of the
1771-IL isolated analog input module.
   
Data Table Usage 8 in/8 out/12 read words/19 write
words
8 in/8 out/15 read words/37 write words
Resolution 12Ćbit binary 16Ćbit binary
Sample Time No RTS, Default 500ms; range
500ms to 3.1s in 100ms increments
No RTS, Default 50ms; range 50ms to 3.1s in 100ms increments
Calibration Mechanical adjustments for gain,
offset and zero offset.
AutoĆcalibration (offset and gain)
Zero offset and gain adjustment for each channel via programming
terminal
Accuracy 0.1% of full scale range @ 25
o
C Voltage: Typical Ć 0.01% of full scale range @ 25
o
C
Maximum Ć 0.05% of full scale range @ 25
o
C
Current: Typical Ć 0.06% of full scale range @ 25
o
C
Maximum Ć 0.1% of full scale range @ 25
o
C
(Includes 0.05% when using internal current resistor)
Common Mode Rejection >120 db @ 60Hz and 1K ohm source
imbalance
>150 db @ 60Hz and 1K ohm source imbalance
Normal mode rejection >120 db @ 60Hz >60 db @ 60Hz
Input Overvoltage Protection +40V peak, continuous voltage mode: 140V ac (rms) continuous;
current mode: 8V dc continuous
Backplane Current 1.3A @ +5V 1.0A @ +5V 1.1A @ +5V
Power Dissipation 6.5 Watts maximum 5.0 Watts maximum 5.5 Watts maximum
Thermal Dissipation 22.2 BTU/hr maximum 17.1 BTU/hr maximum 18.8 BTU/hr maximum
Insternal Scan Rate 500ms for 8 channels (no scaling or
digital filtering)
50ms for 8 channels (no scaling or digital filtering)
Engineering Units sent to
Processor
+9999 BCD with selectable scaling +9999 BCD with selectable scaling
+32767 binary
Agency Cerfification CSA certified,
CSA Class I, Division 2, Groups A, B, C, D certified;
UL listed
CSA certified,
CSA Class I, Division 2, Groups
A, B, C, D certified;
UL listed;
CE marked for all applicable
directives
 
    

Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios