Rockwell-automation 1788-EN2PAR EtherNet/IP and ControlNet to PROFIBUS Manual de usuario descargar pdf (Pagina 10)

10 Rockwell Automation Publication 1788-UM058B-EN-P - September 2014

Preface

Built-in power conditioners and protection help to minimize installation space

requirements. The PA segment is divided between two physical ports (A and B)

with individual protection and a supply of 500 mA per port. See PA Network

Connections on page 16.

Basic diagnostics of the linking device and field devices is found in the input

assemblies. Advanced configuration is accomplished only through the AOP.

To help you troubleshoot the linking device, a 128 x 128 pixel display provides

access to device status information. Status information includes network voltages

and currents, internal temperature, and communication quality to each field

device.

A built-in web server provides remote access to network and field device data.

General Precautions

Read and understand all precautions before using the linking device.

Prevent Electrostatic Discharge

ATTENTION: Prevent Electrostatic Discharge

This equipment is sensitive to electrostatic discharge, which can cause internal

damage and affect normal operation. Follow these guidelines when you handle

this equipment

• Touch a grounded object to discharge potential static.

• Wear an approved grounding wriststrap.

• Do not touch connectors or pins on component boards.

• Do not touch circuit components inside the equipment.

• Use a static-safe workstation, if available.

• Store the equipment in appropriate static-safe packaging when not in use.

IMPORTANT

Do not wire more than one conductor on any single terminal.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 75 76

Sin comentarios

Rockwell-automation 1788-EN2PAR EtherNet/IP and ControlNet to PROFIBUS Manual de usuario Pagina 10