Rockwell-automation 1792-IB8/B INSTL.INST ARMOR BLOCK 8 INPUT Manual de usuario descargar pdf (Pagina 14)

ArmorBlock 8 Input Module14

Publication 1792-5.2 – October 1996

Configuring the Parameters

Default settings for the 8 input module are:

autobaud when

enabled, matches device baud rate to network baud

rate at powerup

enable

f to on delay

time from a valid input signal to recognition by the block

module

0ms delay

on to of

f delay

time from input signal dropping below the valid level to

recognition by the block module

0ms delay

reset faulted I/O

reset sensor source voltage

nothing selected

1. Double click on the parameter you want to change.

The software displays

the parameter number,

name and value.

Read only parameters

(designated by an R)

are also shown.

Parameters can be

viewed all at once,

configuration only, or

I/O only.

The parameter screen appears.

2. Click on the radio button to select a different setting. To save the

setting, click on

. To cancel any changes, click on

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Sin comentarios

Rockwell-automation 1792-IB8/B INSTL.INST ARMOR BLOCK 8 INPUT Manual de usuario Pagina 14