Rockwell-automation 1793-IB2XOB2PS FLEX INTEGRA 2 INPUT/2 PROTECTED OU Manual de usuario descargar pdf (Pagina 4)

4 FLEX Integra 2 Input/2 Protected Output Module

Publication 1793-5.3 - September 1999

Wiring

This module is available with 2 styles of terminations; 1794-IB2XOB2P -

screw-cage and 1793-IB2XOB2PS - spring-clamp. Refer to the wiring

figure below.

1. Connect individual sensor input leads to terminals 2 (channel 0) and 3

(channel 1) on row A.

2. Connect sensor supply lead to +24V dc (terminals 1, 6, 9, or 14).

(Terminals 1, 6, 8, 9, 14 and 15 are connected internally to +24V dc.)

3. Connect associated input common (3-wire sensors only) to terminals

10 and 11 on row B.

4. Connect individual output wiring to terminals 4 (channel 0) and 5

(channel 1) on row A.

5. Connect associated output common to terminals 12 and 13 on row B.

6. Connect +24Vdc voltage to terminal 8 on row B

7. Connect 24V dc common to terminal 0 on row A.

8. If daisy-chaining +24V dc from this module to the next FLEX Integra

module, connect a jumper from terminal 15 to terminal 8 on the next

FLEX Integra module.

9. If daisy-chaining 24V dc common from this module to the next FLEX

Integra module, connect a jumper from terminal 7 on this module to

terminal 0 on the next Integra module.

ATTENTION: Total current draw through the module’s

(+) voltage terminals is limited to 10A. Separate power

connections to the module may be required.

1793-IB2XOB2P 1793-IB2XOB2PS

01234 567

8 9 10 11

13 14 1512

41468

CV CV

CCVVCCVV

OOII

Ch 0

Ch 1

Ch 0

Ch 1

0 123456 7

8 9 10 11 12 13 14 15

41469

CV CV

CCVVCCVV

OOII

Ch 0

Ch 1

Ch 0

Ch 1

Where: C - common, V = + voltage, I = input, O = output

1 2 3 4 5 6 7 8 9 10 11 12

Comentarios a estos manuales

Sin comentarios

Rockwell-automation 1793-IB2XOB2PS FLEX INTEGRA 2 INPUT/2 PROTECTED OU Manual de usuario Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation 1793-IB2XOB2PS FLEX INTEGRA 2 INPUT/2 PROTECTED OU