Rockwell-automation 20-COMM-M Modbus/TCP Adapter Manual de usuario Pagina 68
- Pagina / 98
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
6-8 Viewing the Adapter’s Web Pages
20-COMM-M Modbus/TCP Adapter User Manual
Publication 20COMM-UM014C-EN-P
Figure 6.6 DOS Window Showing E-mail Server IP Address
The IP address shown in the DOS window (for this example,
131.200.78.4) should be typed into the E-mail Notification Web
Page shown in Figure 6.4
.
3. Click Save changes.
Important:After configuring E-mail Notification, it is recommended to
protect the settings. Otherwise the configuration can be
changed anytime the web page is accessed with a browser. To
protect the settings, use Parameter 37 - [Web Features] to set
E-mail Cfg Bit 0 value to “0” (Disabled).
Figure 6.7
shows an example e-mail message automatically sent by the
adapter in response to selected events.
Figure 6.7 Example of E-mail Message Sent by Adapter
TIP: To stop e-mail messages, uncheck all of the “Send an e-mail message
when…” boxes.
Disabling the adapter web pages by setting the Web Pages Switch (SW2 in
Figure 2.1
) to the “Disable Web” position will NOT stop the adapter from
sending e-mail messages.
- 20-COMM-M Modbus/TCP Adapter 1
- Important User Information 2
- Summary of Changes 3
- Table of Contents 5
- About This Manual 7
- Rockwell Automation 8
- Conventions Used in This 8
- Getting Started 9
- Features 10
- Compatible Products 10
- Required Equipment 11
- Safety Precautions 11
- 1-4 Getting Started 12
- Quick Start 13
- Status Indicators 14
- Installing the Adapter 15
- Setting the Web Pages 16
- Connecting the Adapter to 17
- Applying Power 20
- Commissioning the Adapter 22
- Configuring the Adapter 23
- Using the PowerFlex 7-Class 24
- Using BOOTP 25
- Configuring the Adapter 3-5 27
- Setting the IP Address 28
- Subnet Mask, and Gateway 28
- Setting the Data Rate 30
- Setting the I/O 30
- Configuration 30
- Setting a Communication 31
- Fault Action 31
- Setting the Message I/O 32
- Setting Web Access Control 33
- Resetting the Adapter 34
- Viewing the Adapter Status 34
- Using Parameters 34
- Flash Updating the Adapter 35
- 3-14 Configuring the Adapter 36
- Chapter 4 37
- Unit Identifier (Port Number) 38
- Using the I/O 39
- Par. 82 - [Maximum Speed] 42
- Accessing Device Parameters 45
- Direct Access Method 45
- Indirect Access Method 46
- Using Datalinks 48
- Rules for Using Datalinks 48
- Reading Datalinks 48
- Writing Datalinks 49
- Conversion Example: 50
- Supported Modbus 51
- Registers 51
- Chapter 5 53
- PORT Status Indicator 54
- MOD Status Indicator 54
- NET A Status Indicator 55
- NET B Status Indicator 55
- Viewing Adapter Diagnostic 56
- Viewing and Clearing 58
- Table 5.B Adapter Events 59
- 5-8 Troubleshooting 60
- Chapter 6 61
- Process Display Pop-up 64
- TCP/IP Configuration Web 65
- Configure E-mail 66
- Notification Web Page 66
- DPI Device Information 69
- Kit (20-XCOMM-DC-BASE) 73
- Specifications 75
- Environmental 76
- Regulatory Compliance 76
- Adapter Parameters 77
- B-6 Adapter Parameters 82
- Logic Command/Status Words 83
- Logic Status Word 84
- PowerFlex 700S Drives 85
- Glossary 87
- G-2 Glossary 88
- F Fault Action 89
- G Gateway 89
- H Hardware Address 89
- I I/O Data 90
- L Logic Command/Logic Status 91
- M Modbus/TCP Network 91
- N NVS (Non-Volatile Storage) 91
- R Reference/Feedback 92
- S Status Indicators 92
- Z Zero Data 92
- May, 2010 98
Relacionado con productos y manuales para Equipo Rockwell-automation 20-COMM-M Modbus/TCP Adapter
Equipo Rockwell-automation 140G-R-EA1TA Electrical Signalling of Overcurrent Manual de usuario
(3 paginas)
(3 paginas)
Equipo Rockwell-automation 56AMXN ControlLogix/AutoMax/Communication/Module Manual de usuario
(24 paginas)
(24 paginas)
Equipo Rockwell-automation 140G-K-EAM1A Early Make Aux Contact for Rotary Han Manual de usuario
(3 paginas)
(3 paginas)
Equipo Rockwell-automation 57RF RFID ICODE Handheld Interface User Manual Manual de usuario
(112 paginas)
(112 paginas)
Equipo Rockwell-automation 20-COMM PowerFlex 7-Class DPI (Drive Peripheral In Manual de usuario
(4 paginas)
(4 paginas)
Equipo Rockwell-automation 20P PowerFlex DC Drive - Frame D, Series B Fan Cir Manual de usuario
(6 paginas)
(6 paginas)
Equipo Rockwell-automation 22-HIM-C2S PowerFlex 4-Class Remote Small HIM Manual de usuario
(4 paginas)
(4 paginas)
Equipo Rockwell-automation 20P PowerFlex DC Drive - Frame D Field Dual Diode Manual de usuario
(8 paginas)
(8 paginas)
Equipo Rockwell-automation 22B PowerFlex 40 Custom Firmware Inst. - Option AF Manual de usuario
(4 paginas)
(4 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.051 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales