Rockwell-automation 20P PowerFlex DC Drive - Frame B Pulse Transformer Manual de usuario descargar pdf (Pagina 7)

Rockwell Automation Publication 20P-IN009D-EN-P - February 2012 7

PowerFlex DC Drive Frame B Pulse Transformer Circuit Board

6. Carefully disconnect the cables from connectors XA, XR and XFCD on

the Control board.

7. Loosen the two captive screws at the top of the Control EMI shield and

lower the shield.

IMPORTANT

If the drive is not in a vertical position, the Control EMI shield must be secured

in order to remain open.

Disconnect

cables

Loosen screws

Control EMI shield

1 2 3 4 5 6 7 8 9 10 11 12 ... 17 18

Sin comentarios

Rockwell-automation 20P PowerFlex DC Drive - Frame B Pulse Transformer Manual de usuario Pagina 7