Rockwell-automation 2711 ControlNet Communications User Guide Manual de usuario descargar pdf (Pagina 16)

ControlNet Communications16

Publication 2711-6.10

The following tables lists error messages and codes specific to

ControlNet communications. For all other messages, refer to the

PanelView and PanelBuilder user manuals.

Communication Status Error Codes

These errors appear at the top of an application screen or on the

terminal configuration screen. If you should get an alert number that

is not listed here, contact Allen-Bradley for technical support.

Alert Number Alert Type Indicates: Recommended Action(s):

1803 Informational

The communications device has completed the

request to force the device into the listen-only

state.

The PanelView was detected as having a

duplicate node address and is in the

listen–only mode. Check the node address

(MAC ID) of the devices on the network to

verify that addresses are not duplicated.

1824 Warning The PanelView was forced to a listen only state. Contact Allen-Bradley for technical support.

1826 Warning

A fixed tag packet was received but there is no

place to route the packet. The data packet is

discarded and the error message is displayed.

Contact Allen-Bradley for technical support.

1828 Warning

An attempt was made to open an unsupported

transport class.

Contact Allen-Bradley for technical support.

1829 Warning

An attempt to open a Class 1 transport with

application triggering or a Class 3 transport with

cyclic triggering.

Contact Allen-Bradley for technical support.

3333 Warning A connection has timed out. A file transfer was unexpectedly interrupted.

Error Messages

and Codes

1 2 ... 11 12 13 14 15 16 17 18 19 20 21

Sin comentarios

Rockwell-automation 2711 ControlNet Communications User Guide Manual de usuario Pagina 16