Rockwell-automation 2711P Software Development Kit User Manual Manual de usuario Pagina 68
- Pagina / 104
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Publication 2711P-UM005A-EN-P - March 2007
68 PanelView Plus CE-Specific Extensions to the WinCE API
Return Values:
Remarks:
The watchdog register and some non-volatile codes in CMOS support
the Last Boot Reason. An application can use this function to
determine its startup behavior based on how the system was last
shutdown.
Portability:
This function is specific to PanelView Plus CE and the RAC6182
hardware. Some of the return codes are different between the
platforms.
Requirements:
hm_GetBootReason - Return Codes
Value Description
BOOT_REASON_
WARM_REQUESTED
The System was reset by hm_RebootBoard(). Possibly
called by the Software Watchdog.
BOOT_REASON_
WARM_INTERNAL
The System was reset by some operating system
operation, such as the boot ROM, or a firmware update
that required a reboot.
BOOT_REASON_
WATCHDOG
The hardware watchdog reset the System. Possible
causes are a software or hardware failure.
BOOT_REASON_
COLD_POWER_CYCLE
The board was powered down and the system was
rebooted after enough time for RAM to discharge.
BOOT_REASON_
UNKNOWN
The System was reset but the reason is unknown.
Possible causes are a software or hardware failure, or
simply power down during boot, or an extremely brief
power outage wherein memory endures.
BOOT_REASON_RESET_
BUTTON_OR_BROWNOUT
The System has been rebooted. The board reset button
was pressed or the power supply dropped below an
acceptable voltage level.
BOOT_REASON_
CPU_TOO_HOT
The CPU temperature was too high and the system was
shutdown by the CPU temperature sensor. Possible
causes are a failure of the heat sink or an extremely
high ambient temperature.
Runs On Version Defined In Link To
PanelView Plus CE
RAC6182
All HardwareMonitorAPI.h HardwareMonitor.lib
- Software 1
- Development Kit 1
- Important User Information 2
- Table of Contents 3
- 4 Table of Contents 4
- Chapter 5 5
- Device Drivers 5
- Appendix A 5
- Messages 5
- 6 Table of Contents 6
- Using this Manual 7
- Intended Audience 7
- Purpose of this Manual 7
- Manual Conventions 7
- Additional Resources 8
- Terminal 9
- Memory Devices 10
- Boot ROM 11
- Input/Output 12
- Serial Port 13
- Real-time Clock 13
- ATMEL Microcontroller 14
- Software Architecture 15
- Boot and Startup Sequence 16
- The Windows CE Registry 17
- Registry Flushing 18
- File Systems 19
- Input Devices 20
- Keypad Driver 21
- Keypad Handler 23
- Display Module EEPROM 24
- Run Time Environment 25
- Process Priorities 27
- Developing CE Applications 29
- Installing the Application 30
- Remote Installations 30
- Application Upgrades 30
- Persistency Considerations 31
- Set up the Development 31
- PanelView Plus CE SDK 33
- Visual Basic .NET 34
- WinCE API 35
- Hardware Watchdog 36
- Software Watchdog 37
- Return Values: 39
- Remarks: 39
- Portability: 40
- Requirements: 40
- Watchdog_SW_Tag 41
- System Parameters 42
- Parameters: 45
- System Timers 47
- Configure Timer Functions 48
- UserTimerGetNumberOfTimers 48
- UserTimerClaim 49
- UserTimerRequestFrequency 50
- UserTimerGetWaitEvent 52
- Run Timer Functions 53
- UserTimerSet 53
- UserTimerSetEx 54
- UserTimerGetValue 56
- UserTimerStop 57
- Hardware Monitor 58
- Hardware Monitor Functions 59
- Keypad Overview 69
- System Event Log 73
- Log New Event 74
- Clear Event Log 75
- Get Last Event 76
- Get First Event 77
- Get Next Event 78
- Recommended PanelView 80
- Plus CE Mechanisms 80
- Lock Pages 81
- UnLock Pages 82
- SetSystemMemoryDivision 82
- 84 Device Drivers 84
- Sample Code 85
- Exception Debug Messages 98
- C++ Name Mangling 98
- Error Codes 99
- 100 Messages 100
- 2 Index 102
- Rockwell Automation 104
Relacionado con productos y manuales para Equipo Rockwell-automation 2711P Software Development Kit User Manual
Equipo Rockwell-automation 2711 PanelView 1400 Terminals Installation Instruc Manual de usuario
(62 paginas)
(62 paginas)
Equipo Rockwell-automation 2711P-RBxxx Display Module Bezel Replacement Insta Manual de usuario
(28 paginas)
(28 paginas)
Equipo Rockwell-automation 2711P-RNxxx Communication Module for PanelView Plu Manual de usuario
(16 paginas)
(16 paginas)
Equipo Rockwell-automation 7000 PowerFlex AC Drive with Direct-to-Drive Techn Manual de usuario
(20 paginas)
(20 paginas)
Equipo Rockwell-automation 2727-M7P20D1P1, -M7P20D1Q2,-M7P20D1Q3 MobileView M Manual de usuario
(108 paginas)
(108 paginas)
Equipo Rockwell-automation 2085-IF4_IF8_OF4 Micro800 4-channel and 8-channel Manual de usuario
(12 paginas)
(12 paginas)
Equipo Rockwell-automation 61C505 Din-Style Terminal Strip/Cable Assembly-Fus Manual de usuario
(2 paginas)
(2 paginas)
Equipo Rockwell-automation 8520-ARM2 9/Series CNC AMP Reference Manual Docume Manual de usuario
(756 paginas)
(756 paginas)
Equipo Rockwell-automation AutoMax Prog Exec V4.2 and Dist. Power System Driv Manual de usuario
(28 paginas)
(28 paginas)
Equipo Rockwell-automation 9329 Drive Application Software Tension Control Ge Manual de usuario
(52 paginas)
(52 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.109 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales