Rockwell-automation 6181P-xxxx Integrated Display Computers, Series A Manual de usuario descargar pdf (Pagina 33)

Publication 6181P-UM001G-EN-P - July 2008 33

Replace System Components Chapter 4

Install or Remove Add-In

Cards

You can install PCI-compatible cards in the computer’s PCI slot. This

section shows how to install and remove cards using the PCI

Expansion Slot Kit (6189V-2PCI15).

Install an Add-in Card

Follow these steps to install an add-in card.

1. Disconnect power from the computer.

2. Remove the back cover.

3. Remove the slot cover bracket (two screws).

IMPORTANT

The PCI Expansion Slot Kit is not required if you are installing

only one PCI card. The procedure to install one card is similar.

ATTENTION

Failure to follow proper safety precautions could result in

severe electrical shock and/or damage to the computer.

ATTENTION

Add-in cards are sensitive to ESD and require careful handling.

Hold cards only by the edges. Do not touch connectors,

components, or circuits. After removing a card, place it on a

flat, static-free surface, component side up. Do not slide the

card over any surface.

Slot Cover Bracket

Screws

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 71 72

Comentarios a estos manuales

Sin comentarios