Rockwell-automation 6181P-xxxx Integrated Display Computers, Series A Manual de usuario descargar pdf (Pagina 44)

44 Publication 6181P-UM001G-EN-P - July 2008

Chapter 4 Replace System Components

8. Remove the screws securing the drive to the bay and carefully

pull out the drive.

Install the Drive

Follow these steps to install the drive.

1. Fasten the drive to the bay.

2. Connect the drive adapter board to the drive.

Use care with the delicate ribbon cable on the floppy disk drive.

3. Connect the data, power, and audio cables to the drive bay

assembly.

4. Carefully replace the drive bay assembly.

5. Fasten the drive bay bracket to the inner shelf with four screws.

6. Connect the cables between the display and back chassis as

necessary.

7. Carefully reattach the display head to the back chassis using the

12 perimeter screws.

Drive Adapter

Spacer

Drive Brackets

Drive

1200P

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 71 72

Comentarios a estos manuales

Sin comentarios