Rockwell-automation CS300 Trusted Bridge Module Manual de usuario descargar pdf (Pagina 13)

Trusted

CS300 Bridge Module

Issue 02 Feb 10 PD-8162 13

3. Application

All CS300 I/O modules are configured using the IEC1131 application Toolset provided with Trusted

his configuration requires entries in the System Configuration (System.INI) for the chassis and

modules and their hardware operational parameters, and also in the workbench I/O connection table,

for software settings and data connection.

3.1. System Configuration

All Trusted

systems need a system configuration file, specifying the chassis and modules in the

system. For Trusted

/CS300 hybrid systems, a T8311 Expander Interface is required in the

Trusted

controller chassis, as for Trusted

-only systems. An example with Expander Interfaces in

slots 1 and 2 (companion slots) and communications interfaces in slots 7 and 8 is shown below. For

details of the System Configuration Tool please refer to product description PD-T8082.

Figure 7 Trusted

Processor Chassis with Expander Interface

The CS300 chassis are attached to the Expander Interface as if they were Trusted

expander

chassis, but the various chassis options for Triguard and CS300 are provided on the ‘Insert New

Chassis’ dialog. Right-click on the background of the configurator window to insert a new chassis.

Figure 8 Insert New Chassis

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 33 34

Sin comentarios

Rockwell-automation CS300 Trusted Bridge Module Manual de usuario Pagina 13