Rockwell-automation CS300 Trusted Bridge Module Manual de usuario descargar pdf (Pagina 15)

Trusted

CS300 Bridge Module

Issue 02 Feb 10 PD-8162 15

Figure 12 Jumper Setting

This chassis then links into the extension chassis BIC, which is linked to the main CS300 8162 chassis

by ribbon cables.

To add a BIC chassis, right click again on the background and select CS300 BIC. The switch settings

on these chassis should not be changed from their old configuration in the CS300 system. Select the

8162 chassis to connect the new chassis to (Parent 8162 Chassis Number), and enter the chassis

number as configured on the chassis address switches on the BIC chassis (Triguard Chassis

Number). Closing this window and left-clicking on the chassis ends will show the Jumper Config button,

which will confirm the switch settings that have been selected.

Figure 13 BIC Chassis Addressing

The chassis will now show its address on the right end as:

< Trusted

expander Interface slot> - <Expander socket number> - <CS300 chassis number>

e.g. 1-2-2 in the above example.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 33 34

Sin comentarios

Rockwell-automation CS300 Trusted Bridge Module Manual de usuario Pagina 15