Rockwell-automation DeviceLogix System User Manual Manual de usuario descargar pdf (Pagina 115)

Publication RA-UM003B-EN-P - February 2010 115

Navigate the Old Ladder Editor Interface Chapter 4

Tools Menu

The Tools menu lets you modify logic in the old Ladder Editor.

Tools Menu

Function Description

Logic Verify Confirms that the logic that you configured is valid.

Confirms that:

• each rung has a minimum input and output element

• each branch has a minimum element

• each element has the minimum number of bound pins

• each attribute has the correct data type associated with

• the two ends of a binding are of the same type

Compare Compares the logic configured in the device with the logic

configured in the old Ladder Editor. You must be working in

the online mode to use this function.

Edit Mode Toggles between working in the Edit mode and not working

in the Edit mode.

In the Edit mode, it is possible to modify the logic but you

cannot communicate with the device. (That is, you cannot

upload or download logic or use the Logic Enable On or

Logic Enable Off functions.)

When you are not working in the Edit mode, it is possible to

perform online animation. If you are working in online mode,

it is possible to set the preset value or accumulator value of

counters or timers, but you cannot modify logic.

Edit Tags Creates latch, counter, and timer tag names.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 208 209

Sin comentarios

Rockwell-automation DeviceLogix System User Manual Manual de usuario Pagina 115