Rockwell-automation DeviceLogix System User Manual Manual de usuario descargar pdf (Pagina 52)

52 Publication RA-UM003B-EN-P - February 2010

Chapter 2 Navigate the Function Block Editor Interface

Configuration Toolbars

The Function Block Editor toolbars are:

• Standard - Lets you perform general editing functions, verify

logic, and toggle edit mode.

• Tabbed Instruction - Lets you enter Boolean or Analog type I/O,

and add functional elements to the schematic.

• Online - Lets you perform online functions. This toolbar is

enabled only when you are working on line.

Standard Toolbar

Function Description

Sends the logic schematic to a printer.

Removes the selected element.

Duplicates the selected element and send it to the

clipboard.

Places the element in the clipboard at current cursor

position.

Verifies the logic you have configured on the schematic

sheet.

Makes the configuration smaller.

Makes the configuration bigger.

Toggles between the DeviceLogix Function Block Editor

software being in the Edit mode or not being in the Edit

mode. In the Edit mode, you can modify the logic but you

cannot communicate with the device. That is, you cannot

upload or download logic or turn the logic On or Off. When

you are not in Edit mode, you can perform online animation,

if the device is online. You can set the preset value, force

I/O, or accumulator value of counters or timers, and

download to a device, but you cannot modify logic.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 208 209

Sin comentarios

Rockwell-automation DeviceLogix System User Manual Manual de usuario Pagina 52