Rockwell-automation FactoryTalk Historian SE 3.0 UniInt Interface User Manual de usuario Pagina 64

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 108
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 63
Interface Disconnected Startup
58
Figure 3: ICU configuration screen with the “Enable PI SDK” radio button selected. In this configuration, the
“UniInt Disconnected Startup” feature is disabled and contains a message prompting the user to first
disable the PI SDK if the disconnected startup feature is desired.
UniInt version 4.3.0.x or later must be installed on the interface node to support the
disconnected startup configuration. The following figure shows how the ICU display will
look when the UniInt version is not suitable for the disconnected startup feature.
Vista de pagina 63
1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 107 108

Comentarios a estos manuales

Sin comentarios