Rockwell-automation FactoryTalk View Site Edition Installation Guide Manual de usuario descargar pdf (Pagina 109)

8 • DEPLOYING LOCAL STATION APPLICATIONS

• • • • •

Specify OPC data server host computer names

After moving RSLinx Classic configuration files to production computers, open the

restored local station application, and in the Properties dialog box for each data server,

specify the name of the server’s host computer.

For information about setting up other data server properties, click Help in the server’s

Properties dialog box, or see the product documentation.

To change the RSLinx Classic server computer name

1. Click Start > All Programs > Rockwell Software, and then click

FactoryTalk

View Studio

2. Select

View Site Edition (Local Station)

, and then click

Continue

3. Click the

Existing

tab, select the local station application’s name, and then click

Open

4. In the Explorer window, right-click the RSLinx Classic server’s name, and then click

Properties

5. In the General tab, in the field, Computer that will run the OPC server, type the name

of the production computer, or click Browse to find and select the computer, and then

click

Specify when HMI server components start or stop

In FactoryTalk View Studio, open the Properties dialog box for the HMI server in the

application, to view the location of the HMI project files, the current number of displays

in the application, and the maximum number of displays allowed.

You can add a description for the HMI server and, in the Components tab, select

components that will start when the HMI server starts running.

Unlike RSLinx Classic data servers, you do not have to change the computer names of RSLinx

Enterprise data servers. The RSLinx Enterprise data server in a local station application must be

located on the same computer as the application, and is always named localhost.

The first time you open an application after relocating a data server, if the server does not load,

you should still be able to open the Properties dialog box and change the host computer name.

After the computer name is updated, the server should load as expected.

In a local station application, the HMI server and the application have the same name. The name

cannot be modified in the HMI server’s Properties dialog box.

FTViewSEInstallENU.book Page 95 Wednesday, July 16, 2014 10:53 AM

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 172 173

Sin comentarios

Rockwell-automation FactoryTalk View Site Edition Installation Guide Manual de usuario Pagina 109