Rockwell-automation FactoryTalk View Site Edition Installation Guide Manual de usuario descargar pdf (Pagina 33)

3 • PRE-INSTALLATION CONFIGURATION

• • • • •

 (Windows 8.1, Windows 8, or Windows Server 2012)

Press the Windows button+X, select Control Panel.

2. In Control Panel, click

Appearance and Personalization

3. Under Personalization, click

Change the theme

On the Themes tab, in the Theme list, click

Windows Classic

, and then click

For Windows XP or Windows Server 2003

1. Select

Start > Control Panel

2. In Control Panel, double-click

Displays

3. On the Themes tab, from the Theme list, select

Windows Classic

, and then click

Manually configure NICs and switch ports

The NIC (Network Interface Card) is the hardware in a computer that lets it connect to

other devices on the network. A switch manages traffic on the Ethernet network. Some

switches allow ports (physical connections) to be configured individually.

The link speed and duplex settings for network connections can be auto-negotiated (the

device determines the best way to communicate), or manually configured (settings are

hard coded).

Many NICs also offer a power-saving feature that turns off the network card if it is not

being used. This setting sometimes interferes with the ability of the computer to receive

data, causing errors such as wireframes, stale data, and other failures. To prevent these

errors, disable power saving for your computer’s network interface cards. For details, see

“To disable power saving for the NIC”, on page 21.

For FactoryTalk View SE applications, it is recommended that you use managed switches

across the control system network and that you manually configure the same link speed

and duplex setting for all network connections into the managed switches.

It is also recommended that you manually configure the managed switch ports, using the

same settings. To learn how to configure switch ports, see the product documentation

provided with the switches you are using.

FTViewSEInstallENU.book Page 19 Wednesday, July 16, 2014 10:53 AM

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 172 173

Sin comentarios

Rockwell-automation FactoryTalk View Site Edition Installation Guide Manual de usuario Pagina 33