Rockwell-automation Logix5000 Control Systems: Connect a PowerFlex 70 Manual de usuario descargar pdf (Pagina 13)

Rockwell Automation Publication IASIMP-QS030A-EN-P - July 2012 13

Chapter

Prepare the PowerFlex 70 Drive Hardware

In this chapter, you learn how to complete the following tasks:

• Mount and wire power to a PowerFlex 70 drive.

• Set the DeviceNet communication card’s operation mode, node address, and

communication rate.

• Connect the communication card to the drive.

• Connect the communication card to the network.

Before You Begin

Before you begin, complete these tasks described in Before Using This Publication on page 5:

• Prepare the Logix5000 control system hardware - Verify the control system and the

DeviceNet network are powered.

• Prepare the computer

• Configure the network

• Create an RSLogix 5000 project - The example RSLogix 5000 project used in this quick

start uses a CompactLogix 5370 L3 controller.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 53 54

Sin comentarios

Rockwell-automation Logix5000 Control Systems: Connect a PowerFlex 70 Manual de usuario Pagina 13