Rockwell-automation Logix5000 Control Systems: Connect a PowerFlex 70 Manual de usuario descargar pdf (Pagina 19)

Rockwell Automation Publication IASIMP-QS030A-EN-P - July 2012 19

Prepare the PowerFlex 70 Drive Hardware Chapter 1

Connect the Drive to the DeviceNet Network

1. Remove a knockout from the

bottom plate on the drive.

A hole is created at the bottom of

the drive through which you can

route a connector cable.

2. Connect the 1799-DNC5MMS

5-pin linear to micro male adapter

to the female end of the 1485K-

P1F5-R5 KwikLink right-angle

micro male to micro female

connector cable.

3. Route the connector cable

through the hole in the bottom of

the drive and connect it to the

DeviceNet connector on the

adapter.

Knockout

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 53 54

Sin comentarios

Rockwell-automation Logix5000 Control Systems: Connect a PowerFlex 70 Manual de usuario Pagina 19