Rockwell-automation Logix5000 Control Systems: Connect PanelView Plus Manual de usuario descargar pdf (Pagina 15)

Rockwell Automation Publication IASIMP-QS033A-EN-P - March 2012 15

Prepare the PanelView Plus Terminal Hardware Chapter 1

Connect the Power Supply

This quick start uses a PanelView Plus 1000 terminal with built-in Ethernet port and a

PanelView Plus Logic module, catalog number 2711P-RP1, Series G. The 2711P-RP1 Logic

module uses a 2-position terminal block for power connections.

Complete these steps to connect power to the PanelView Plus terminal.

1. Install the 2711P-RSACDIN DC power supply for the PanelView Plus terminal on a

DIN rail.

Do not turn on power to the power supply.

For detailed information on how to install a 2711P-RSACDIN DC power supply, see the

AC Power Supply for PanelView Plus/PanelView Plus CE Terminals Installation

Instructions, publication 2711P-IN005.

WARNING: Verify that all incoming power is turned off before wiring power.

GND

–

GND

Earth/Ground to Ground Bus

DC - DC +

2-position

Terminal Block

24 VDC

POW

ER SUPPLY

2711P-RSACDIN

POWER

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 55 56

Sin comentarios

Rockwell-automation Logix5000 Control Systems: Connect PanelView Plus Manual de usuario Pagina 15