Rockwell-automation Logix5000 Control Systems: Connect PanelView Plus Manual de usuario descargar pdf (Pagina 22)

22 Rockwell Automation Publication IASIMP-QS033A-EN-P - March 2012

Chapter 2 Create a PanelView Plus Application

• Install an I/O module with the following conditions:

– Accessible to the PanelView Plus terminal over the EtherNet/IP network

– Included in the RSLogix 5000 project used with this quick start.

This publication uses a 1769-OB16 digital output module.

• Prepare the PanelView Plus terminal as described in Chapter 1, Prepare the PanelView Plus

Terminal Hardware on page 13, including:

– Mount the PanelView Plus Terminal

– Connect the Power Supply

– Connect the PanelView Plus Terminal to the EtherNet/IP Network

– Assign an IP Address to the PanelView Plus Terminal

What You Need

You need the following software to complete the tasks described in this chapter:

• FactoryTalk View Studio software

• RSLinx Enterprise software

• RSLogix 5000 software

IMPORTANT

This section describes how to install FactoryTalk View Studio software and RSLinx

Enterprise software.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 55 56

Sin comentarios

Rockwell-automation Logix5000 Control Systems: Connect PanelView Plus Manual de usuario Pagina 22