Rockwell-automation Logix5000 Control Systems: Connect PanelView Plus Manual de usuario descargar pdf (Pagina 21)

Rockwell Automation Publication IASIMP-QS033A-EN-P - March 2012 21

Chapter

Create a PanelView Plus Application

In this chapter, you learn how to complete the following tasks:

• Create a push button and a multi-state indicator in FactoryTalk View Studio software.

• Transfer the application to the 2711P-K10C4D1 drive so you can test communication with

the controller.

Before You Begin

You must complete these tasks before using this chapter:

• The tasks described in Before Using This Publication on page 5, including:

– Prepare the Logix5000 control system hardware

– Prepare the computer

– Configure the networks - The tasks described in this chapter require an

EtherNet/IP network.

– Create an RSLogix 5000 project- In your RSLogix 5000 project, include a ladder logic

rung with Examine On and Output Energize elements as shown. In this example, the

alias tag named OB16_Light is an alias for point Local:1:O.Data.0.

The example RSLogix 5000 project used in this chapter uses a

CompactLogix 5370 L3 controller.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 55 56

Sin comentarios

Rockwell-automation Logix5000 Control Systems: Connect PanelView Plus Manual de usuario Pagina 21