Rockwell-automation SD3000 Drive Configuration, Programming Manual de usuario descargar pdf (Pagina 68)

3.7

Interrupt Status and Control Registers (Registers 2000-2047)

This view is used to configure registers that control the operation of interrupts to a task on an

AutoMax Processor in the rack and to enable CCLK in the rack. These registers are used for Drive A

and B. Only one UDC task should write to these registers. Note that the status of these registers is

not retained after a Stop All.

2000 Interrupt Status Control Register

Hex Value:

N/A

Sug. Var. Name:

UDC_lSCR%

Range:

N/A

Access: See individual bits

UDC Error Code:

N/A

LED:

N/A

Description: The Interrupt Status Control register contains the following information. Only bit 6 can

be written to by the user.

All other bits are read only.

Bit: 0

Hex Value: 0001

Sug. Var. Name:

N/A

Range:

N/A

Access:

Read only

UDC Error Code:

N/A

LED:

N/A

Description:

Interrupt Line Identification.

Bit:

Hex Value: 0002H

Sug. Var. Name:

N/A

Range:

N/A

Access:

Read only

UDC Error Code:

N/A

LED:

N/A

Description:

Interrupt Line Identification.

Bit: 2

Hex Value: 0004H

Sug. Var. Name:

N/A

Range: N/A

Access:

Read only

UDC Error Code:

N/A

LED:

N/A

Description:

Interrupt Allocated.

Bit: 4

Hex Value: 001

Sug. Var. Name:

N/A

Range:

N/A

Access:

Read only

UDC Error Code:

N/A

LED:

N/A

Description:

Interrupt Generated This Scan.

3-48

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 117 118

Comentarios a estos manuales

Sin comentarios

Rockwell-automation SD3000 Drive Configuration, Programming Manual de usuario Pagina 68

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation SD3000 Drive Configuration, Programming