Rockwell-automation T3468A ICS Regent DC Guarded Digital Output Module Manual de usuario descargar pdf (Pagina 13)

(T3461A, 62A, 68A) DC Guarded Digital Output Modules

6019

Mar

Fault Mode Jumper

The fault mode jumper is located behind the ID switch cover

in the lower left

hand corner of each I/O chassis. The position

of the fault mode jumper determines the module's response to

system level faults. The fault mode jumper’s position will

cause all output modules in the I/O chassis to either shutdown

(turn off all outputs) or to hold (hold the last state) after a

system level failure occurs. An example of a system level

failure is the failure of two processor modules.

Keying

The I/O chassis can be physically keyed to prevent accidental

damage caused by inserting a module into a slot wired for a

different module type. Figure

illustrates how the slot keys

are installed on the I/O chassis slot field wiring connectors.

The

slot key positions for the DC Guarded output modules are

listed in Table

Table

. Slot Key Positions.

Module

Upper

Connector

Lower

Connector

T3461A

T3462A

T3468A

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Rockwell-automation T3468A ICS Regent DC Guarded Digital Output Module Manual de usuario Pagina 13