Rockwell-automation 1395 Multi-Comm Hardware/Software Manual de usuario descargar pdf (Pagina 11)

Chapter 2

Introduction and Product Description

2–4

DIP Switch Orientation DIP Switch orientation (Figure 2–2) on the MCA board is as Follows:

CLOSED = “ON” = “1”

OPEN= “OFF” = “0”

Figure

2-2. DIP Switch Orientation

On On Off Off

Board Location The standard mounting position for the MCA board is Port B of the Drive

(Refer to Figure 2–3). If required, the Adapter can be mounted in Port A.

Note that each port uses different parameters to store Adapter setup and

configuration information.

Figure

2-3. MCA Board Mounted in Port B

AB0747A

J1J1

MultiCommunications

Adapter (MCA) Board

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 146 147

Sin comentarios

Rockwell-automation 1395 Multi-Comm Hardware/Software Manual de usuario Pagina 11