Rockwell-automation 1738-ADNX ArmorPoint DeviceNet Adapters, Series A Manual de usuario

Busca en linea o descarga Manual de usuario para Equipo Rockwell-automation 1738-ADNX ArmorPoint DeviceNet Adapters, Series A. Rockwell Automation 1738-ADNX ArmorPoint DeviceNet Adapters, Series A User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 16
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
Installation Instructions
ArmorPOINT I/O DeviceNet Adapters
Catalog Numbers 1738-ADN12, 1738-ADN18, 1738-ADN18P,
1738-ADNX, Series A
Topic Page
Important User Information 2
Environment and Enclosure 3
Prevent Electrostatic Discharge 3
About the Adapter 4
Mount the I/O Base 5
Install the Adapter 6
Set the Network Address 7
Wire the Adapter 8
Interpret Status Indicators 10
Specifications 13
Vista de pagina 0
1 2 3 4 5 6 ... 15 16

Indice de contenidos

Pagina 1 - Installation Instructions

Installation InstructionsArmorPOINT I/O DeviceNet AdaptersCatalog Numbers 1738-ADN12, 1738-ADN18, 1738-ADN18P, 1738-ADNX, Series ATopic PageImportant

Pagina 2 - Important User Information

10 ArmorPOINT I/O DeviceNet Adapters Publication 1738-IN014D-EN-E - December 2010Interpret Status IndicatorsThis module has the following status in

Pagina 3 - Environment and Enclosure

ArmorPOINT I/O DeviceNet Adapters 11Publication 1738-IN014D-EN-E - December 2010DeviceNet status Off Device is not online:- Device attempting to A

Pagina 4 - About the Adapter

12 ArmorPOINT I/O DeviceNet Adapters Publication 1738-IN014D-EN-E - December 2010System power Off Not active – field power is off or DC-DC converte

Pagina 5 - Mount the I/O Base

ArmorPOINT I/O DeviceNet Adapters 13Publication 1738-IN014D-EN-E - December 2010Specifications Attributes ValueExpansion I/O capacity 63 mo

Pagina 6 - Install the Adapter

14 ArmorPOINT I/O DeviceNet Adapters Publication 1738-IN014D-EN-E - December 2010Power Supply SpecificationsAttributes ValueInput voltage rating, n

Pagina 7 - Set the Network Address

ArmorPOINT I/O DeviceNet Adapters 15Publication 1738-IN014D-EN-E - December 2010Mounting base screw torque M4 (#8) screw 0.86 Nm (7.5 lb-in) in Al

Pagina 8 - 1738-ADN18, 1738-ADN18P

Publication 1738-IN014D-EN-E - December 2010Supersedes Publication 1738-IN014C-EN-E - December 2009 Copyright © 2010 Rockwell Automation, Inc. All rig

Pagina 9 - Auxiliary Power

2 ArmorPOINT I/O DeviceNet Adapters Publication 1738-IN014D-EN-E - December 2010Important User InformationSolid state equipment has operational cha

Pagina 10 - Interpret Status Indicators

ArmorPOINT I/O DeviceNet Adapters 3Publication 1738-IN014D-EN-E - December 2010Environment and EnclosureFollow these guidelines for environment an

Pagina 11 - Indicator Status

4 ArmorPOINT I/O DeviceNet Adapters Publication 1738-IN014D-EN-E - December 2010About the AdapterThe ArmorPOINT I/O family of DeviceNet adapters sh

Pagina 12

ArmorPOINT I/O DeviceNet Adapters 5Publication 1738-IN014D-EN-E - December 2010Mount the I/O BaseMount the I/O base on a wall or panel, use the sc

Pagina 13 - Specifications

6 ArmorPOINT I/O DeviceNet Adapters Publication 1738-IN014D-EN-E - December 2010Install the mounting as follows:1. Lay out the required points as s

Pagina 14 - General Specifications

ArmorPOINT I/O DeviceNet Adapters 7Publication 1738-IN014D-EN-E - December 2010Remove the Adapter From the Mounting BaseFollow the instructions to

Pagina 15 - Environmental Specifications

8 ArmorPOINT I/O DeviceNet Adapters Publication 1738-IN014D-EN-E - December 2010minor fault occurs, which is indicated by a flashing red Adapter St

Pagina 16 - Certifications

ArmorPOINT I/O DeviceNet Adapters 9Publication 1738-IN014D-EN-E - December 2010Auxiliary PowerAttach the mini-style 4-pin connector to the mini-st

Comentarios a estos manuales

Sin comentarios