Rockwell-automation 1738-ADNX ArmorPoint I/O DeviceNet Adapters Manual de usuario descargar pdf (Pagina 54)

Publication 1738-UM001A-EN-P - February 2005

4-2 Configure the DeviceNet Scanner Subnet

You must follow these steps during configuration:

1. Add the scanner to your network

2. Add I/O modules to your network

3. Set the scanner’s parameters

4. Go on line

Add the Scanner To Your Network

Follow these steps:

1. Start RSNetWorx for DeviceNet.

2. Add the scanner as shown below.

1. Expand the list of

communication adapters.

2. Select the 1738-ADN12

ArmorPoint Scanner.

The scanner appears

on the network.

3

IMPORTANT

The scanner must always exist on the Subnet at

Node 00.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 133 134

Comentarios a estos manuales

Sin comentarios