Rockwell-automation 1738-ADNX ArmorPoint I/O DeviceNet Adapters Manual de usuario descargar pdf (Pagina 56)

Publication 1738-UM001A-EN-P - February 2005

4-4 Configure the DeviceNet Scanner Subnet

Type the scanner’s name here.

Type a description here (optional).

The scanner’s address must = 0.

This window also shows the

scanner’s device identity. These

fields are read-only.

Use Associate File to

associate this configuration

file with the configuration file

that configures the same 1738

ArmorPoint DeviceNet

scanner (called adapter on the

primary network) for

communication with a master

device on the primary

DeviceNet network.

For more information on the

need to maintain two

configuration files in the same

adapter and the simultaneous

presence of the adapter on

two networks (i.e., DeviceNet

as a slave and PointBus as a

master), see page 4-1.

Click OK to accept the parameters.

IMPORTANT: Configuration changes mad

in offline mode do not take

effect until the scanner goe

on line. For more

information on how the

scanner goes on line, see

page 4-8.

Use Clear Association to remove

previously established configuration

file associations that no longer apply

to your scanner.

General window

Device Bridging window

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 133 134

Sin comentarios

Rockwell-automation 1738-ADNX ArmorPoint I/O DeviceNet Adapters Manual de usuario Pagina 56